Do Links Still Matter for SEO in 2017?

Link Building 2017

In today’s post, I’ll show you data from three different dates over the past year that illustrate why links remain a powerful ranking factor. I’ll also discuss in detail why Google still uses them, and why they are likely to remain a powerful ranking factor for some time to come.

In July of 2016, we published our first study on Links as a Ranking Factor. Today’s post updates that data with a fresh analysis of links as a ranking factor, to see if there is any indication of a decline in their importance. In fact, we have analyzed the power of links as a ranking factor on three different dates, as follows:

  1. May 2016
  2. August 2016
  3. May 2017

The Results

Let’s dig right in and look at the results across all three data sets that we pulled:

Bar Chart Shows Quadratic Mean Spearman Correlation Score

Note that the same 6,000 queries were used in all three data sets, and we see that the value stays steady and strong throughout the time period. Some movement back and forth is natural. We used 6,000 queries because that is what we did with the original study on this topic. With the Study Two and Study Three data sets, we also pulled data samples for 16,000 queries. Here are the correlation scores for those two data sets of 16K queries:

Bar chart shows Quadratic Mean Spearman Correlation Score

Once again, both data sets show strong results. Note: See the methodology section below for an explanation of what a “Quadratic Mean Spearman Correlation Score” value actually means.

In the first study, we also took a view in which we aggregated the normalized link counts (see the methodology section below for an explanation of what that is) by ranking position. The purpose of this approach was to help adjust for the fact that the relevancy and quality of the content are such significant ranking factors, and to help us further evaluate how links might matter. Here is what we saw:Bar Chart Shows Aggregate Link Correlation by Ranking Position

In this data, there is some apparent erosion, but the story is quite different if you look at the results for the two 16K query sets:

For this data set, we see a lift between Study Two and Study Three, which is in contrast to the 6K data set. As a result, my belief is that this is simply normal movement of the rankings from a variety of factors.

 

Why Aren’t the Non-Aggregated Correlation Values Higher?

There are two major reasons, as follows:

1. Relevance and Content Quality are Big Factors: In its simplest form, if a web page is not relevant to a query, it shouldn’t rank. That is, of course, obvious, but the discussion is much more nuanced than that. To illustrate, let’s say we’ve got 10 pieces of content that are relevant enough to be considered for ranking for a query. Let’s further say that they have “relevance scores” (RS) like this:

Table Shows Ranking Based on Relevance Score

This looks like it could be a pretty good ranking algo on the surface. We’re ranking the most relevant content on top. You’ll notice too that I set my relevance scores in a really narrow range, and that makes sense. If you’re not relevant, you shouldn’t rank.

The problem is that it’s pretty easy to make pieces of content look highly relevant just by stuffing the right words in it, and the most relevant content may in fact be giving very poor information to users. So let’s add a new score called quality score (QS) (not the Adwords version of this term, but an actual organic evaluation of a page’s quality instead), and let’s see how that impacts our algorithm:

Table Shows Ranking Based on Relevance and Quality Scores

This appears to be an improvement, and it probably is. The problem here is that, as with measuring relevance, measuring quality is a difficult thing to do. So let’s add one more element to the mix, that of a Link Score (LS), and leverage that to let the “marketplace at large” give us an indication on what content is the best on this topic. Here is what that looks like:

Table Shows Ranking Based on Relevance, Quality, and Links Scores

You see how the rankings shifted around between the three scenarios? Pretty substantially. In this mock-up of the Google algorithm, it’s pretty clear that links are VERY important. Want to know the Spearman score for links as a ranking factor in the third scenario shown? It’s 0.28.

While this is a major simplification of the Google algorithm, but even based on this, you can see why very high Spearman scores are hard to achieve.

2. Other Algorithms Come Into Play: Examples of the type of algorithms I’m talking about include:

  • Local search results
  • Image results
  • Video results
  • Query Deserves Diversity results

These might impact 15 percent of our results. Let’s imagine that it changes only one of them, and one high scoring result is replaced with a single item (result number 3).

Table Shows Ranking Impacted by Another Google Algorithms

In our example, I’ve replaced the third result with something that came in from another algorithm, such as Query Deserves Diversity. Know what this does to the Spearman score for links as a ranking factor for this result? It drops to 0.03. Ouch!

Hopefully, this will give you some intuition as to why a score in the 0.3 range is an indication that links are a very material factor in ranking.

Google’s Progress in Fighting Link Spam

Those who say that links are on the decline as a ranking factor often point to the efforts by spammers to use illegitimate practices to acquire links and earn rankings that their sites don’t deserve. This certainly was a huge problem for Google in the 2002 to 2013 time range. However, the tide in this battle started to turn in 2012.

What happened first during that year was that a wave of manual penalties started to get assessed by Google. By themselves, these already sent a shockwave through the SEO industry. The next major step was the release of the first version of Penguin on April 24, 2012. This was a huge step forward for Google.

As the next few years unfolded, Google invested heavily in a mix of approaches to use new versions of Penguin and manual penalties to refine their approach to dealing with people that use illegitimate approaches to obtaining links. This culminated with the release of Penguin 4.0 on September 23, 2016.

With the release of Penguin 4.0, Google’s confidence in their approach to links had become so high that the Penguin algorithm was no longer punishing sites for obtaining bad links. As of Penguin 4.0, the algorithm simply identifies those links and ignores them (causes them to have no ranking value).

This shift from penalizing sites with bad links to simply discounting those links reflects Google’s confidence that Penguin is finding a very large percentage of the bad links that it’s designed to find.

Of course, they still use manual penalties to address types of illegitimate link-building practices that people use that Penguin is not targeted at addressing.

How much progress has Google actually made? I still remember the Black Hat / White Hat panel I sat on in December of 2008 at SES Chicago. With me were Dave Naylor, Todd Friesen and Doug Heil. A couple of the panel members argued that buying links at the beginning of campaigning for a website was a requirement, and it was irresponsible for an SEO pro to not do so.

How a decade changes things! It has been many years since any SEO in any venue has argued that buying links represents a smart practice. In fact, you can’t find anyone making public recommendations about methods for obtaining links that violate Google’s Webmaster guidelines. The entire industry for doing those type of things has been driven underground.

Driven underground is not the same as “gone,” but it does show that Google’s ability to find and detect problems has become quite effective.

One last point, and it’s an important one. Ask yourself, why does Google have the Penguin algorithm, and why do they assess manual link penalties?” The answer is simple: Because links ARE a major ranking factor, and schemes to obtain links that don’t fit their guidelines are things that they want to proactively address.

Why Are Links a Valuable Signal?

Why is Google still using links? Why don’t they simply switch to user engagement signals and social media signals? I won’t develop the entire reason why these signals are problematic here, but will share one point about each:

  1. Social Media Signals: Google can’t be dependent on signals from third-party platforms that are run by their competitors (Google and Facebook are not friends).
  2. User Engagement Signals: Google probably finds some way to use these signals in one scenario or another, but there are limitations to what they can do. Here is what the head of their machine learning team, Jeff Dean, said about them: “An example of a messier reinforcement learning problem is perhaps trying to use it in what search results should I show. There’s a much broader set of search results I can show in response to different queries, and the reward signal is a little noisy. If a user looks at a search result and likes it or doesn’t like it, that’s not that obvious.”

But now, let’s get to the core of the issue: Why are links such a great signal? It comes down to three major points:

  1. Implementing links requires a material investment to be made by you. You must own a website and you must take the time to implement the link on a webpage. This may not be a huge investment, but it’s significantly more effort than it is to implement a link in a social media post.
  2. When you implement a link, you are making a public endorsement identifying your brand with the web page that you’re linking to. In addition, it’s static. It sits there in an enduring manner. In contrast, with a link in a social media post, it’s gone from people’s feeds quickly, sometimes only in minutes.
  3. Now, here is the big one: When you implement a link on a page on your site, people might click on it and leave your site.Google Process in Fighting Spam Image

Think about that last one for a few seconds more. A (non-advertisement) link on your site is an indication by you (as the publisher of the page with the links) that you think the link has enough value to your visitors, and will do enough to enhance your relationship with those visitors, that you’re willing to have people leave your site.

That’s what makes links an incredibly valuable signal.

Basic Methodology

After consulting with a couple of experts on the best approach (Paul Berger and Per Enge), I performed a calculation of the Spearman Correlation on the results for all the queries in our study, and then took the Quadratic Mean of those scores. The reason for doing this is that it leverages the square of the correlation variables (where the correlation value is R, the quadratic mean uses R squared).

It’s actually the R squared value that has some meaning in statistics. For example, if R is 0.8, then R squared is 0.64, and you can say about that 64 percent of the variability in Y is explained by X. As Paul Berger explained it to me, there is no meaningful sentence involving the correlation variable R, but R squared gives you something meaningful to say about the correlated relationship.

Here is a visual on how this calculation process works:

Quadratic Mean Calculation of Links as a Ranking Factor

In addition to the different calculation approach, I also used a mix of different query types. We tested commercial head terms, commercial long tail terms and also informational queries. In fact, two-thirds of our queries were informational in nature.

Additional Approaches

I think that both the Mean of the Individual Correlations and Quadratic Mean approaches are valid, but one of the limits with these approaches is that other factors can dominate the ranking algorithm, and make it hard to see the strength of the signal.

For that reason, I chose to take some other approaches to the analysis as well. The first of these was to measure the links in a more aggregated manner. To do this, we normalized the quantity of links for each result. What I mean by this is that we took the link counts for each ranking position for a given query, and then divided it by the largest number of links for that given query.

As a result, the largest link score for each query would have a weight of “1”. The reason for doing this is to prevent a few queries that have some results with huge numbers of links from having excessive influence on the resulting calculations.

Then we took the total of the links for all the search results by each ranking position. The equations for this look more like this:

Using Total Links by Ranking Position to Calculate Correlation

The value of this is that it smooths out the impact of the negative correlations in a different way. Think of it as smoothing out the impact of other ranking factors, as illustrated above (relevance score, content score, and the impact of other algos). This is the calculation that is shown in the “Aggregate Link Correlation by Ranking Position” data above.

I also looked at this one more way. In this view, I continued to use the normalized totals of the links, but grouped them in ranking groups of 10. I.e., I summed the normalized link totals for the top 10, did the same for ranking positions 11 to 20, 21 to 30, and so forth. I then calculated the correlations to see how they looked in terms of what it would take to rank in each 10 position block.

Those calculations looked more like this:

Calculate Correlation by Blocks of 10 in the SERPs

This gives us a bit more granular approach than simply aggregating all the ranking positions into the SERP positions, but still smooths out some of the limitations of the Mean of Individual Correlations method. That is what is shown in the “Aggregate Link Correlation in Blocks of 10” data above.

Cementing the Point with Case Studies

We do a lot of high-end content marketing campaigns with our clients, many of which are Fortune 500 companies. Here is a sampling of the results across many of our clients:

Sample Content Marketing Results

The sample results shown here have been repeated hundreds of times by us. However, we don’t find that links can rescue poor quality content, or cause low relevance content to rank. Also, all of our efforts focus on getting recognition from, or content published on, very high authority sites.

Doing this well requires a focus on how you implement your marketing and PR to get in front of the audiences that matter to your business the most. This will naturally drive high value links back to your site, and help you earn rankings that you deserve.